Um einen konstanten Wasser-Zement-Wert, der für eine gleichbleibende Qualität des fertigen Spritzguts unerlässlich ist, zu erreichen, hat die WERNER MADER GMBH eine wesentliche Verbesserung mit der neuen WM-Flex air+ Düse erzielt. Durch die zusätzliche Luft in der Wasserzugabe bleibt die zugegebene Wassermenge nahezu konstant - auch bei schwankenden Wasserdrücken. Zudem treten weitere positive Effekte auf: Im Vergleich zur bekannten Spitztechnik werden Haftzugwerte sowie Porosität stark verbessert. Bereits erste Laboruntersuchungen haben dies beeindruckend gezeigt. Ein zusätzlicher Effekt ist die deutlich verringerte Staubentwicklung und der erheblich geringere Rückprall.
![]() |
|
In order to maintain the correct level of clamping pressure of the sealing plate on the rotor at all times, we have developed a new system that displays the clamping pressure on a screen. This type of transmission allows precise adjustment of the sealing plate's clamping pressure.
In practical terms, this means a further reduction in the wear of both the sealing plate and the rotor and, as a consequence thereof, a further cost reduction by preventing operating errors.
![]() |
|
Radio remote control system for our pocket wheel and rotor gunite machines (spraying machines).
The set includes:
Hand transmitter with clip.
Receiver with calble and connector.
Comes with two piece of rechargeable battery and charger.
The receiver is plugged directly into the jack at the cable remote from the machine. It's a small and compact design, so the transmitter can be carried around by the nozzle operator. The operator can start and stop the machine wirelessly.
![]() |
|
This water pump is used anywhere where there is insufficient water pressure (minimum of 6 bar). In the dry spraying process, however, this minimum pressure is required to ensure that water fully penetrates the material to be conveyed.
Optionally, the pump for increasing water pressure can be switched via the machine's control.
![]() |
|
This loading aid facilitates the loading and unloading of our machines if no forklifts or ramps are available.
The loading aid consists of a stable protective jacket with standard load hook. The round sling is held and at the same time protected by the additional jacket.
Maximum load: 1000 kg
![]() |
|
Flexible spraying nozzle for use in tight spaces such as on scaffolding, in chimneys or during work on channels.
Available in the following sizes:
For hose NW 32: Nozzle outlet 15 mm, 18 mm and 28 mm
For hose NW 38: Nozzle outlet 32 mm
![]() |
|
Dryspraynozzle for Hose dia 32 mm. Nozzleoutlet 18 mm.
![]() |
|
Dryspraynozzle for Hose dia 32 mm. Nozzleoutlet 15 mm.
Specially designed for filling wall gaps with guniting.
![]() |
|
Dryspraynozzle for Hose dia 32 mm. Nozzleoutlet 28 mm.
![]() |
|
Dryspraynozzle for Hose dia 38 mm. Nozzleoutlet 32 mm.
![]() |
|
Dryspraynozzle for Hose dia 50 mm. Nozzleoutlet 42 mm.
![]() |
|
Dryspraynozzle for Hose dia 65 mm. Nozzleoutlet 54 mm.
![]() |
|
Nozzle holder for Hose dia NW 50, complete with water valve for use with Nozzle dia NW 50 mm.
![]() |
|
Nozzle holder for Hose dia NW 32, complete with Nozzle NW 32/18 and water valve
![]() |
|
Nozzle holder for Hose dia NW 32, complete with water valve for use with Nozzle dia NW 32/18 and 28mm.
![]() |
|
Nozzle holder for Hose dia NW 38, complete with water valve for use with Nozzle dia NW 38 mm.
![]() |
|
Nozzle holder for Hose dia NW 65, complete with water valve for use with Nozzle dia NW 65 mm
![]() |
|
Rotor for machine WM-14-FU. Size: 1,2 liters.
![]() |
|
Rotor for machine WM-14-FU. Size: 3,7 liters.
![]() |
|
Rotor for machine WM-14-FU. Size: 5,2 liters.
![]() |
|
Rotor for machine WM-05-FU. Size: 0,8 liters
![]() |
|
Rotor for machine WM-05-FU. Size: 1,8 liters
![]() |
|
Rotor for machine WM-05-FU. Size: 2,6 liters
![]() |
|
Rotor for machine WM-05-FU. Size: 3,4 liters
![]() |
|
Rotor for machine WM-24-FU. Size: 1,6 liters
![]() |
|
Rotor for machine WM-24-FU. Size: 4,3 liters
![]() |
|
Rotor for machine WM-24-FU. Size: 6,7 liters
![]() |
|
Rotor for machine WM-24-FU. Size: 9,2 liters
![]() |
|
Rubberplate WM-05-FU upperside
![]() |
|
Rubberplate WM-05-FU lowerside
![]() |
|
Rotordisk for use with Rotor 3 liters with machine WM-14-FU.
![]() |
|
This spraying is suitable for a grain size up to about 5 mm mortar mineral bound.
![]() |
|
This spraying is suitable for a grain size up to about 5 mm mortar mineral bound.
![]() |
|
Finenozzle to the process of sealing slurries, paints and fine spatula.
With Gekacoupling and 8.5 mm nozzle. For products with maximum grain size of 3 mm.
![]() |
|
Stator D5 2,5 for Vario-Jet-FU Watercooled
![]() |
|
Stator KP 20
![]() |
|
Rotor KP 20
![]() |
|
Stator 2NE.
![]() |
|
Rotor 2 NE WM-mini-FU
![]() |
|
Mortar pressure indicator with switch off pressure 0-60bar for inject jobs.
For use with the Pumps: Vario-Jet-FU and WM-mini-FU.